How to renovate the old rattan chair

It depends on the depreciation of the rattan chair. If it is only old in appearance and the structure is not hindrance, it is recommended to brush a new layer of new paint. The step is to clean and dry it, then use sandpaper to polish its outer rattan frame to stain the Skin and restore the epidermis and recoverSmooth, and then protect the optical oil. After using it for a period of time, wipe the vine ware with light saline, which can not only stain and make it flexible and lasting.It plays a very important effect.If the rattan itself is broken and broken, you must go to the rattan shop and find someone to repair it.

What are the main points of the rattan chair to clean and maintain

The shape of the vine chair is beautiful and novel, and the handmade skills are exquisite.However, it will still appear dirty after using it for a long time, so in the usual vine chair maintenance, pay attention to cleaning problems.First of all, we can use some light saline to wipe the vine chair to achieve the effect of pollution.For us, the ash on the rattan chair is a difficult problem in cleaning. It doesn't matter. Xiaobian is here for you.For the dust treatment during the maintenance of the rattan chair, we can wipe it with a soft wet cloth. If the dust between the seams of the rattan chair, we can use a paint brush or a vacuum cleaner to clean it. Do not wipe the rattan chair with a cleaner or solvent.Come to clean, so as not to lose elasticity and gloss in the vine chair.Finally, the cleaning of the rattan chair should be remembered. After wiping it with a wet cloth, dry it with a dry cloth, because the rattan chair is equivalent to woody easy moisture. Pay attention to the maintenance of the rattan chair.

Keep ventilation.The cross section of the rattan chair is covered with fine catheter, so the vine chair can absorb a certain amount of water. If these moisture reaches a certain degree, it will appear soft, loose structure, and drooping planes, and it will be prone to mildew.Therefore, in the cleaning of the rattan chair, remember to dry it with a dry cloth.Secondly, the maintenance ventilation of rattan chairs is also critical, especially in the south of the rainy season, the maintenance ventilation in the maintenance of rattan chairs is particularly important.After cleaning the rattan chair, if we feel that it is very troublesome to dry it with a dry cloth, we can also move the rattan chair to a place with a church to blow off the air.The opposite effect leads to deformation and even break.

Five types of decontamination method cleaning rattan furniture

1, Soap Discovering Method

You can cut the hard hair of the paint brush into a small brush, and you can remove the dirt in the furniture with them.Vine furniture should be used for drying the furniture for one day, one or two nights after cleaning.

The tea is dirty, and the painted furniture is contaminated with dust. It can be wiped with wet tea residue wrapped in gauze, or scrubbing with cold tea, which will make the furniture particularly Smooth and bright.

2, Milk Discovering Method

Use a clean rag to soak in the milk that cannot be drunk in the expiration, and then wipe the tables such as the table with a rag to remove the effect of dirt, and finally wipe it with water.

3, Lemon Discovering Method

If the wooden furniture is scalded by the match, you can wipe it with half lemon first, and then wipe it with a soft cloth immersed in the hot water.Finally, use the dry soft cloth to quickly dry and brighten it to recover as early as the beginning.

4Plane pollution method

Wipe the surface of the furniture with the equal amount of white wax and hot water phase, and then rub it with a soft cloth.

5, Salt water pollution method

The accumulation of rattan furniture has a long period of time, which not only affects the appearance, but also is not hygienic, but it cannot be washed with ordinary detergent to avoid damage to the rattan bar.

How to clean and maintain vine art furniture

1Roney furniture cleaning

(1) After long -term use of rattan furniture, rattan furniture usually becomes dirty or ash, at this time, it needs to be cleaned.When cleaning rattan furniture, use less water.You can use a clean cloth dipped in water for cleaningThen, then

(2) If you use light salinede1The effect will be better. Fresh salt water can not only remove the bacteria on the rattan furniture, but also keep it more flexible for a longer longer, prevent it from becoming crispy, or be worm.

(3) In addition, some subtle places and gaps can use toothbrushes, wicker and other fine hairs to eliminate storage dirt in the gap.

2, Avoid direct sunlight in the sun

(1) Tengyi family has a lot of pores, and rattan furniture is the most afraid of benefits. Pay attention to avoid the key such as the key to hurt the furniture.

(2) The best way to maintain rattan furniture is often sitting and often sitting. Frequent use will not only give vicissitudes of vicissitudes of vicissitudes of vicissitudes, but also help maintain the toughness of rattan materials.

(3) When using and stored rattan furniture, avoid contact with the source of the fire, the heat source, and do not place it under the sun for a long time.

(4) Protonous rattan furniture refurbishment method, clean and dry first, then use sandpaper to polish its outer rattan frame, make the epidermis dirt and return to Smooth, and then protect the light oil.

3Put the level of anti -deformed level

(1) When storage and use, try to place it in a flat place on the ground, so that the four legs of rattan furniture are safely and smoothly. If it is placed on the ground, the furniture often shakes, which will affect the service life of the furniture.

(2When using and storage, try not to be exposed to the sun, approach the supply, or high temperature objects and places, otherwise it will cause problems such as deformation, burn, cracking and so on.

4, To buy rattan furniture points

(1) Buy rattan furniture first starting from the material of the rattan, check the thickness of the rattan materials for making furniture, usually choose furniture made of rattan with thick and uniform and uniform mixed color.

(2) The inferior vine is thinner, small toughness, low tensile force, and low tensile power. The furniture of furniture is weak. The important ability is weak. You need to pay special attention to whether the position of the position has a rough or uneven feeling.

(3) The rattan material made of rattan furniture is refined by high -temperature steaming and standard production technology. The rattan rod requires the consistent thickness and uniform color; then check whether the overall color of the rattan furniture is consistent, whether the binding part is stable, whether the appearance is correct; When buying, pay attention to the treatment of rattan fiber. Whether the surface of the rattan material is Smooth and delicate, and protect the paint.

5, Rattan art furniture moisture -proof treatment

(1) Wide vines must prevent moisture. When rattan furniture is moisture, it will cause wood to decay. Metal type accessories will rust, the adhesive part is dehydrated, and so on.

(2) You must prepare for the prevention of moisture. Do not use water to clean the vine furniture. Do nt clean it with alkaline water. You can use a wet cloth to wipe it. Do nt rinse it with water. If you unfortunately wet the rattan furniture, find a way to air dry as soon as possible is the best choice!

bamboo rattan is the same natural material as wood.Although they are two different types of materials, they have many common features in materials.Many of them are the same in processing and structure, and can be used together.bamboo is hard and strong.The surface of the rattan is Smooth, tough, elastic, soft and elegant.bamboo or rattan can be used alone or combined with wood, metal and other materials.Ordinary bamboo rattan furniture includes round bamboo furniture and vine furniture. Its structure is relatively the same, usually divided into two parts: skeleton and surface layer.

1. Choices of bamboo and rattan raw materials

There are many types of vines, known600The species, among them, the most commonly used in Miru, red vine, sand, and Badan vine.The thickness of the Badan vine and sand is generally uniform, which is a good material for making vine chairs. The flexibility of Rito is very good, and it is an indispensable raw material for making disk flowers.

2. Machining tools for bamboo vines

This isIt is often used when making bamboo and vine furnituretools: Warbers, high -pressure air cooling guns, operating desk.The setting of the operating table is relatively simple, but it is a lot of use. It is the main Tool for vines.There are on the operating table2The diameter is respectively8Cm25The iron -shaped cylindrical body of the cm is fixed on it, and the distance between the two iron cylinders is10CM.The process of our curved vines was done on this operating table.

Third, bamboo and rattan raw material grinding

The surface of the rattan is relatively rough, and it is a piercing plant, so when making it, the raw materials must be carried out"Practicing" treatment.This kind of polishing machine Tool is a Tool for grinding the raw materials of the vine, mainly using the sag and the grinding wheel to polish.The polishing should be divided into two times to complete, once it is polished, and the other is finely polishing.

The first step is rough

Roughly polishing, using80The type of coarse Belt; placed the rattan between the grinding machine and the grinding wheels, and slightly forceful to make the surface of the rattan basically Smooth.

Step in the second step

After the first round of polishing, the surface of the rattan was already much Smooth, but it was still slightly rough. At this time, the second round of fine polishing was needed.Now we use this180Follow the fine sofa Belt again,180sofa Belt ratio80The type of sand band is thinner, so that the grinding vines will be smoother.

Fourth, bamboo vine furniture manufacturing process

Skeleton: Types of the structure of the skeleton.

The skeleton of bamboo and vine furniture is mainly made of bamboo raft and thick vines.It has a strong anti -frustration, elasticity, easy bending, simple structure, and beautiful appearance.There are four types of skeletons:1All of them are composed of bamboo or rattan.2It consists of bamboo and vine, which can make full use of the characteristics of the material and easy to process.3Metal frames, weaving sitting and back on the frame.4A wooden frame, woven the seat and back on the frame.

The method of connecting the skeleton.There are three basic methods to join the bamboo vine frame.

1, Bending method.There are two methods of curved bamboo vine materials: one is a bending method, with a small diameter of bending.The other is a razor bending method with a large diameter, that is, a part of the curved part is dug out to form a concave for bending.The small curvature method applied to the frame bending is to dig a small part on the curved part, hold another bamboo vine material, and use bamboo needles to nail on one side of the curved side to prevent sliding.

2, Entangled.Also known as vine leather entanglement, it is the most common structural method commonly used in bamboo and vine furniture.The main feature is that in the connection part, it is entangled with the rattan leather, and the bamboo frame should be perforated on the link first.The rattan frame should be nailed together, and then the fragments are entangled with the rattan.There are three entanglement methods based on their part: one is for two or more entanglement.The other is to tie the two strips in the direction of each other, and they are divided into curved entanglement.Joint joints are connected to the broken.Each is connected in the middle part and is used in the middle part of the two rods in the horizontal direction.In addition, a single bar has rattan Skin to enhance the touch and decoration.

3Covering method.This is a unique combination of bamboo furniture.It is used to connect two different diameter bamboo rafts and make holes in the large bamboo Tube.Then, insert a suitable small bamboo Tube and lock it with bamboo nails.Scattered on wooden boards or vines.

[Tengyi Furniture] How to clean the Fujidi Furniture of Fujidi Furniture

How to clean and maintain vine art furniture

1 , Avoid direct sunlight to prevent the fading and drying of vine materials.

2 Do not make it contact and close to the source of fire and heat. Do not expose it for a long time under the sun, otherwise it will be easy to deform, bend, crack, loosen and remove.

3 Because there are many places on the surface of rattan furniture, cleaning can be used with a vacuum cleaner first or using a soft bristles to wipe away from the inside out, then wipe it with a wet rag, and finally wipe it with a soft rag clean.Just accept it.

4 After a period of use, the vine can be used to test the vine furniture supplies with light saline water, which can not only stain it, but also keep it flexible for a long time.

5 , Primary color Tee Furniture Revolution Method: Cleanly dry it first, and then use sandpaper to polish the vine shelf outside the rattan furniture, so that the epidermis removes the stains and restores smoothly.

6 The rattan family has a lot of pores, and rattan furniture is most afraid of benefits. Pay attention to avoid the key such as the key and other benefits.The best way to maintain rattan furniture is often sitting and frequent sitting. Frequent use will not only give vicissitudes of vicissitudes of vicissitudes, but also help maintain the toughness of vine materials.When using and storing vines furniture, avoid contact with the source of the fire and heat, and do not place it under the sun for a long time.

rattan furniture arrangement

Vine furniture is one of the oldest furniture in the world. A long time ago, people chose to use vine to make various furniture, such as tables, chairs, beds, and storage cabinets.The rattan is woven it into various patterns as a back, door or rattan.The original processing procedures of the rattan are quite complicated, and it should be treated through the process of cooking, drying, bleaching, anti -virus, disinfection and sterilization.Vine furniture is strictly processed, which has the characteristics of good flexibility, strong breathability, natural texture, refreshing feel, comfortable and unique, and ergonomic engineering.In terms of appearance, the vines furniture, elegant, beautiful, generous, close to nature, and has high appreciation.Shang Tengmou Furniture Mall, buy rattan furniture to decorate your living space!

[bamboo vine furniture] How to maintain the advantages and disadvantages of bamboo vine furniture

bamboo and rattan furniture is one of the oldest furniture varieties in the world. The production is very sophisticated. It needs to be painted by light, light oil, and even paint color, making the finished product look firm and durable.What are the advantages and disadvantages of bamboo rattan furniture?Let's understand the advantages and disadvantages of bamboo and vine furniture as well as the maintenance skills of bamboo and vine furniture with Xiaobian!

1. Advantages of bamboo rattan furniture

1. The bamboo in bamboo and vine furniture has its unique natural pattern. The texture is clearly visible. It can always give people a rustic and elegant and fresh.

2. bamboo and vine furniture also knows the function of absorbing ultraviolet rays by few people, making the eyes more comfortable and preventing myopia.bamboo also has sound insulation effects to make the home more peaceful.

3. bamboo rattan furniture has no chemical pollution, pure environmentally friendly furniture, strong heat absorption ability, and maintains the natural green of bamboo.bamboo and vine furniture maintains the unique texture of bamboo.bamboo and vine furniture uses special glue, environmentally friendly green, and will not be harmful to the human body.

4. bamboo furniture adopts natural bamboo. It is a natural environmental protection of bamboo furniture made of bamboo furniture made of bamboo furniture.

5. bamboo and vine furniture has the effects of moisture absorption, natural breathable, and soothing.If you use vine -made furniture as many as possible in the bedroom in summer, it will be of great benefit to summer avoidance and sleep.bamboo vine furniture is warm in winter and cool in summer, and it is why consumers are rushing.

6. The design of bamboo and vine furniture is biased towards classical styles and most of them are frame structures. The assembly structure is added on the basis of the frame structure. Therefore, the framework is the skeleton of vine furniture.The framework of bamboo and vine furniture simply presents the appearance of the furniture, and it also simply expresses the force part. The reasonable or not of the frame structure directly affects the beauty, stability and strength of the furniture.The rationalization of bamboo rattan furniture is also one of the highlights of bamboo rattan furniture.

2. Disadvantages of bamboo and rattan furniture

bamboo and rattan furniture can effectively prevent insects and mildew and mildew.Although there are many advantages of bamboo furniture, bamboo furniture in the market still does not respond well.As a result, this reaction is derived from people's misunderstandings about current bamboo furniture. Consumers generally believe that bamboo furniture has not been treated with any anticorrosiveness, anti -mothing, etc., and it is prone to mothing and cracking.

Third, bamboo rattan furniture maintenance skills

1. Salt and pollution and elasticity

If the bamboo vine furniture has been used for a long time, it is best to scrub it with salt water.

2. Pay attention to insects

bamboo and vine furniture is easy to grow insects. Pay attention to insects.Worm -proof and insecticidal can be soaked with 0.5%to 3%bleaching powder solution.Spray mosquito -killing agents with commercially available mosquitoes and sprinkle insects with boiling water.bamboo furniture can also expose insects in the sun.After treatment, apply a layer of paint inside and outside the bamboo and rattan furniture, and apply it again every 2 to 3 years.

3. Pay attention to deformation

bamboo and vine furniture can adsorb a certain amount of water, but if you adsorb excessive water, it will become soft, the structure is loose, and the plane is drooping.Therefore, when bamboo and vine furniture is moist, be careful not to let its weaving shapes look sampled, so that after drying, it will shrink to its original size.

4. Brush the dust and go to dirt

clean vine furniture is not troublesome, and you can cultivate your body slowly.Use a soft brush of the hair to remove the dust from the inside to the outside.If the stain is too heavy, it can be erased with a detergent. Vegetable oil and soap are the best cleaner for cleaning rattan furniture.Finally wipe it again.If it is a white vine chair, you need to apply a little vinegar to neutralize the detergent to prevent color degeneration.Dip the sulfur with a brush with a brush and brush the vine chair, and you can also remove the dirt.

5. Relax should be processed immediately

When the bamboo and vine furniture finds that there are loose and cracking, it is necessary to immediately be tied to the connection to make the falling parts recover in time. Otherwise, it will be loosened and cracking with other places. The chair will be scrapped after being tied up and it is best to apply a layer of paint.

6. Prevent heating

bamboo rattan furniture furniture is most avoided next to the heating. The bonding site will be dry and weakened due to heating. Do not place it next to the heating pipe to avoid deformation due to heating.Avoid direct sunlight to prevent the fading and drying of the vine material.In addition, high -temperature hair dryers, electric iron, etc. should also be avoided directly on top.

[Outdoor tables and chairs] The structure and characteristics of the rattan chair purchase skills

The structure and characteristics of a vine chair

Vine furniture frame decoration structure design

In addition to the connection, the framework can also be decorated appropriately before assembling other components. The main decorative method is to entangle.Leave the muscles (clip vine entangled), edges and entanglement (primary entanglement, tangled edges, and snake belly).When designing, whether the furniture's frame needs to be tangled and tangled, it is also one aspect of design.

Facial structure design

The facial layer is a weaving layer or other types on the basis of the frame.In the rattan furniture, there are many facial layers, and the forms of the surface are diverse. According to the structure and formation method of the surface layer, the surface layer can be divided into prefabricated frame weaving surface, prefabricated rattan assembly surface, and component structure surface layer, components, components, componentsThe structural surface layer includes supporting plate weaving surface, covering surface woven surface, component rattan assembly surface, component frame woven surface, and separate woven surfaces.Various surface layers and assembly methods are different. The more commonly used assembly structures are the weaving assembly method, nailing sealing method, and press fixing method. The shape effect and strength performance of various methods are different.In the design of rattan furniture, the structure and assembly structure of these facial layers must be understood and understood, and it must be applied in the design of the furniture, and the shape can be realized.

Of course, the weaving surface itself has different patterns, and its own weaving structures are different.The type of pattern pattern is extremely rich. At the same time, the facial layer itself also has the closing structure. When designing the furniture structure, these must also be considered.

Vine chair casual chair purchase skills

First, see if the luster on the surface of the furniture is uniform, whether there are traces of spots, different colors and insects.

Second, you can grab the edge of the vine furniture with both hands, shake it gently, and feel whether the framework is stable, and wipe it on the surface of the furniture on the surface of the furniture with your palms.

Third, in addition to the fine compilation skills of the rattan, the most important thing is to see if the rattan equipment is excellent.For example, wrinkles on the surface of the rattan material indicate that the furniture is processed with young rattan, which is poor and easy to break and corrodes. For more high -quality rattan furniture, please clickrattan furniture online mall