What should I do if I can't suck the suction shelf

1. Dip water

The main reason that causes the suction shelf is often on the plane. When there is dust on the wall or mirror surface, it will cause air leakage to the inside of the suction cup.Impurities exist.At this time, you can dip it in water, or use hot water to soften the suction cup and stick it. Remember to slowly press out from the middle to the surroundings to drive out the air, but be careful not to blame the suction cup and deform.

2. Put the egg white

Separate the egg white in the egg from the egg yolk and apply the egg white to the inside of the suction cup with a cotton swab. Remember to be uniform, and only a thin layer is enough.After going up, the egg white is completely killed. It takes almost 12 hours to work. At this time, the suction cup is firmly fixed on the wall, and it will not fall off anymore.The principle is that the egg white contains glue, which can help the suction cups better adhesive and the contact surface, and the glue fills the gap and squeeze the air, so the suction cup will firmly suck on the wall.

3.

Use toothpaste to replace the egg white can also have the same effect. Squeeze out an appropriate amount of toothpaste and apply it on the back of the suction cup, and then stick to the corresponding position. When the toothpaste is almost combined with the hookThe effect of water and soapy water is much better.

4. Wipe it with alcohol

A large part of the suction cup folded is that the position of the paste is not handled clean. Wipe it with alcohol and remove the dust, so that the paste will be firm.

How to install the suction shelf

1. It is best to install the wall with a Smooth plane;

2. Dry the wall with a dry cloth;

3. Press the suction cup to the wall from the middle to the surroundings;

4. Then wait for a while before use.

How to remove the suction shelf

1. If the glue is hard (such as AB glue), it can be heated with a hair dryer with a hot air. After softening, use the knife to remove it.

2. If the glue is soft, cut it directly with the artist knife.

3. If the glue is relatively thin and there is no thickness, you can use the fish wire to be removed. Use a wet rag (rough) to add a cleaning agent a few more times.

[kitchen Multifunctional Set] What are the classified kitchen racks in the kitchen?

What are the categories of the kitchen multifunctional shelf?

The kitchen multifunctional shelf is divided into two types, one is wall -mounted, and wall -Hanging multi -functional racks are hung on the kitchen wall, which can save our space more.You only need to put it simply to complete our goal of storage.This mode must be careful to dry it when we put the tableware. If our tableware is still wet, it will cause our kitchen utensils to rust or cause our area to water.

There is also a flat type. This type of kitchen utensils are still casual.Where is the right place, it can be placed and where it is very convenient, and it does not need to be installed. It is loved by many consumers.In the process of using this type of multifunctional stand, be sure to wipe it a few times to make it cleans a few times.

How to buy the kitchen multifunctional shelf

1. Look at the material

Whether the material of the rack can not rot or deformed rust in a humid environment. Carbon steel is cheaper than stainless steel, but it is usually higher than stainless steel, but it will rust.The anticorrosive performance of stainless steel is better, the surface is Smooth, the use time is long, but the strength of stainless steel is low, and the price is expensive.

2. watch net film

Nets pay more attention to the bearing gravity. Generally, each floor of the kitchen can bear 30-50kg each floor, but the standards of various manufacturers are different.High -quality mesh can see the precise welding process, the mesh pattern is more dense, it is not easy to be bent, and more items can be placed.The inferior mesh has no way to meet the requirements of the load. The density is large and can only put some small items.

3. Look at the connection

The connection of the Kitchen rack can adjust the layer height of the mesh. The unique design can be freely moved at any time, and the ordinary shelf fixed structure design cannot be adjusted, and more items cannot be placed.

4. Look at the wall

High -quality kitchen -stitched rack Tube walls are generally more than 0.8mm, and it is not easy to deform, and the load is also guaranteed.The inferior Tube wall is only about 0.4mm. If it exceeds the maximum load, it is easy to bend and deform.

5. Look at non -slip glue pads

It is best to have anti -slip glue pads in the Kitchen rack, and it can be adjusted according to the ground to facilitate the use of uneven ground. It uses good material for rubber, which is more abrasion -resistant and non -slip to make the kitchen shelves more firm.

How to build a grid frame

(1) Select the grid panel

You can choose panels according to personal preferences, the amount of budget, and the way to match the surrounding decoration environment.Some of the commonly used panels include:

Cork board: This kind of wooden board is easy to cut to the required length, suitable for placing many types of things, including sinking books.

Parahics: This plate is made up of several layers of tablets.The surface is often a wooden layer, or the mold layer.

Shellfish or hard cardboard: Squeeze the wood chip to squeeze together, it is a common grid panel, which has the characteristics of light weight, low price, and easy to buy.It is best to cut the panel into the length of the panel first, because the panel's plate is relatively rough, and it is easy to cut a dull saw Tool.

Fine woodwork: This kind of plate is stronger than the particleboard, suitable for heavier items, such as tools and garage utensils.

(2) Select the grid support material

Select support according to the type of grid panel.In some cases, the grid support is hidden, but it does not mean that the surface board does not require support.

Wood bars support: simple and effective, can be used to fix the grid panel and maintain it in a suitable position.The wooden bar support used at both ends of the grid surface is called a splint support.You can use a wooden strip to nail on the front panel to cover the splint next to it.

Metal profile: It can be purchased from a hardware store and can be used to support the grid.Metal profile support is not so beautiful, and it may only be suitable for the collection of hardware tools used in garage or cabinets.

Support parts: usually L -shaped, style can be fancy or simple and simple.The use of support parts is simple, and it is usually suitable for various shelves.Some supporting parts may be fancy and can bring good decorative effects, but usually spend more money than simple styles.

(three)Set up a wall frame

1,According to the position you want on the wall, the stand is stabilized on the wall.Mark the position with a pencil.Use tape measures to measure and mark the position of another stand on the wall.

2,According to the position marked on the wall on the wall, the eyes required to drill the fixed bracket on the wall.Remember to check the electrical wiring or pipeline location in the wall.A large newspaper can be spread on the floor under the wall to collect and fall out of the dust.

3,Put the bracket on the wall.Drill the screws on the wall to fix it, and twist the screws as darker as possible.

4,Place the shelf to the bracket.Use one hand to stabilize the shelf.Then, place the other end of the shelf to the place where the position is marked on the wall to see if the level.If the mark looks accurate and can keep the shelf level, then keep this mark motionless; if it is not accurate, adjust the mark appropriately.

5.Drill the bracket on the wall.Refer to the horizontal direction and installation location of the first bracket.

6.Put the shelf on the bracket.Put the shelf on the bracket, screw the screw from the bottom, and tighten the shelf.It must not be twisted into the screw too much, so that the screw tip is exposed to the surface from the bottom.The screw must be completely stayed in the shelf.

7.Put away the newspaper paved on the floor and pour the dust from the drilling.Gently press the grid to check whether it is firmly fixed to the wall.

8.Completed.You can now put your crafts, books or other things to be collected on the new grid.

Grid matching technique

1. The style is consistent

The style of selecting the grid should be consistent with the overall style of the home. Generally speaking, the wooden grid and the bamboo grid frame are more natural and simple, and the metal grids and plastic grids are more focused on modern style.

2. The colors are consistent

The color of the grid should be harmonious with the color of the home. The color of the wooden grid and the bamboo shelf is generally lighter. The color of the metal grid is dark, and the color of the plastic grid has multiple choices.

3. The grid rack is lined with storage items

To determine what it is about to store before selecting the grid, if it is stored in precious porcelain antiques, etc., you can use the metal grid to match it.Relief or bamboo grid.

What material is good for the sanitary room?

1. Stainless steel shelf

The stainless steel bathroom stand is very wide in our daily life. The stainless steel bathroom stand has corrosion, corrosion, erosion, and wear wear during use.It can ensure the integrity of its structural components.The stainless steel is divided into many types, and the service life of different types is different. It is recommended to choose 304#stainless steel in the selection of rack materials in the bathroom, which can effectively extend the life of the bathroom shelf.

2. Ceramic stand

The shelf of ceramics is beautiful and generous, suitable for various decoration styles.And the pattern of ceramic materials can be drawn according to customer needs, with many color styles.The ceramic frame is easy to break, so be careful when used.For general home bathrooms, ceramic materials are not a very good choice.Not only because of its fragile characteristics, because its surface is easy to form dirt, it is not easy to clean.

3. Marble

Usually the humid environment in the bathroom is likely to breed a large amount of bacteria, but the marble -based plants have antibacterial effects and are conducive to people's healthy life.And marble is strong and durable, with long service life.However, it must be noted that the heavy characteristics of marble also determine that it requires many additional support to ensure that the rack can withstand the weight of marble, so the price is usually more expensive.

4. Composite plate standing rack

The composite plate material refers to superimposed another metal board on a layer of metal plate.The shelf of this material not only maintains anticorrosive performance and pressure resistance, but also optimizes the use of resources and reduces production costs, so the price is usually relatively low.If you want to choose cheap and affordable products, it is recommended to buy a bathroom shelf made in composite board materials.

The installation height of the bathroom shelf

The proper height should be selected during the installation process. Of course, the location is also very important. It is best that we can get it as soon as we can reach out when we use the bathroom product.It is best to control below 190cm, because the place where ordinary people can contact is about 110cm, so we put the shelf at about 110cm.

installation principles of bathroom shelf

1. When installing a rack on the bathroom wall, follow the principles of convenience and practicality.When installing the rack, you must consider the layout of the entire space and daily habits. For example, the height of the installation of the shelf must be considered, it is best to use the height of what users can go to the things on it.

2. The installation of racks on the wall should abide by the principle of saving space.The bathroom and bathroom are relatively small in our family, so the installation of the shelf must save space and use every space reasonably.

3. The installation of racks on the wall should be classified clearly.There are many types of shelves on the wall, and some of the shelves have several layers. The height space of each layer is different. This also determines the size of the bottle that can be put in the toilet.Sex, so install different sets in the bathroom in different positions, so that they can "perform their duties" in order to make home life methodically.

How to install the bathroom rack

1. Preparation Tool

If you want to install a rack in the bathroom, you must first go to the mall to buy the rack. It is best to buy a suitable size rack according to the space of the bathroom, and to prepare a basic commonly used tools such as impact drilling, hammer, Tool knife, screwdriver.Note that according to the size of the expansion screws used in installation, choose the big drill of the largest one.

2. Positioning

Suitable on the wall, measure the height and hole distance with the tape tape, and mark it with a pen to determine the location of the shelf installation.Drilling the wall with an impact drill.

3. Install screw fixing

Put the expansion screws in the hole, then knock the plastic expansion screws into the hole with a hammer, cut off the excess part with a knife, fix the lower pendant base fixed on the wall with an attached screw, and tighten the screw knife.Then adjust the main body set of the pendant.Tighten the screws with six wrenchs.

4. Install the rack

Insert the rack into the fixed screw, adjust the position, and avoid the rack tilted down because of gravity. Finally, the screw is tightened with a wrench, and the bathroom rack is installed.

Sweet and Stepshop skills Purchasing skills

1. Pay attention to the size first.Many of the storage racks that are purchased for bathrooms are small or large because the size is different, or it is large. How should I deal with this situation?This requires everyone to measure the size and find a company with a certain customized bathroom rack. They will save you space and cost.

2. Secondly, check whether the bearing bearing gravity of the bathroom shelf is good.Although the bathroom racks generally do not place heavy objects, they have a lot of baths for a long time, and their weights cannot be ignored. Therefore, the bearing capacity of the bathroom shelf must be good.

3. Check whether the base of the bathroom shelf is firm.The base of the bathroom shelf must be firm, otherwise it is easy to loosen or even fall.

4. Then see if the style of the bathroom shelf is matched with other bathroom sanitary ware.In order to ensure the decorative effect in the bathroom, every sanitary ware style installed in the bathroom must be consistent, of course, including bathroom hardware pendants, so the bathroom shelf is not exception.

5. The material of the bathroom shelf must be reliable, including the material of the bracket and the shelf must be good, and it cannot rust and deform in a humid environment for a long time.This generally uses a bathroom shelf made of stainless steel or alloy.

How to maintain the bathroom shelf

1. Develop the habit of opening windows and windows frequently. This will not only keep the air in the bathroom Smooth, but also keep the bathroom dry, which helps the family's health and absorb more fresh air.

2. The surface of the rack should be wiped with soft cotton cloth and water to ensure bright luster. You must not use corrosive acid -alkali solutions, and try not to wash it with detergent.

3. Usually if we want to decorate, do not let the paint on the shelf, because the paint has a great corrosion effect on the plating on the surface of the rack.

Where is the huge hook nail better?

[bathroom glass Set Film] How to clean the glass shelf in the bathroom glass?

Is the bathroom glass stand?

The bathroom is a place where it is often dealt with with water. The environment is relatively humid. The bathroom racks should be in a humid environment for a long time. Therefore, when choosing the material of the rackMaterial.Because the bathroom is much greater than other space humidity, if it is a metal material, it is easy to rust, and the rusty shelf is indeed very sad to use.The glass rack is a good choice.

General glass racks are made of tempered glass.Not only is styling and simple, but also easy to clean, but be careful to avoid strong impact on the glass surface.glass setting the rack is precise workmanship, complete quality.Metal electroplating, consolidating durable, not easy to rust, strong bearing capacity.The transparent and bright, highlighting the fashionable beauty.The glass shelf uses high -quality metal plating. The design is well -behaved, cumbersome, clean and beautiful, can promote air circulation, reduce dust accumulation, and open design, making the storage at a glance.

The glass shelf has a variety of functions in one body. It can be used not only in the bathroom, but also can be used as a kitchen shelf/fruit stand/vegetable frame.Its advantage.

How to clean the glass rack

1. Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaning agent, cloth or paper towels, and any acidic cleaning agent, brighter abrasive or cleaner or soap, wipe the surface of the rack surface on the surface of the rack surfaceEssence

2. Because the long -term residues of chromium -plated surfaces such as various kinds of wash and shower gels are usually used to degenerate the surface of the shelf and directly affect the surface quality.Please clean the surface of the rack once at least once a week, and it is best to use a neutral cleaner.

3. For the difficulty of removing dirt, surface dirt film and stains, please use mild liquid cleaner, colorless glass cleaning solution or polish liquid without wear, and then use water to clean the rack and use it with waterSoft cotton wipe dry.

4. You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

5. You can use wax oil with strong decontamination capacity and apply it on a clean white cotton cloth to completely clean the entire product. The cycle is generally 3 months, which can extend the life of the rack.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.